HOZKING - Shower & Entrance Door Pulls
Technical Reference · ZHAOQING HAOZHIJIE METAL PRODUCTS CO., LTD.

Specification & Installation Guide

Practical selection guidance for stainless steel grades, tempered glass and timber door compatibility, back-to-back mounting hardware, and project application scenarios.

01 / Material Comparison

Stainless Steel Grades & Wood-Grip Options

Select the base material according to ambient humidity, coastal exposure, and tactile design requirements.

Economy Dry Indoor

SS201

Cost-effective stainless steel for dry interior spaces such as indoor office partitions, dry corridor doors, and budget-conscious residential projects.

Recommended For: Dry interior doors away from steam or salt air.
Standard Core Most Popular

SS304

All-around architectural stainless steel offering reliable corrosion resistance for daily bathroom humidity, commercial storefronts, and interior/sheltered entrances.

Recommended For: Frameless shower enclosures, commercial glass doors, and general projects.
High Corrosion Marine / Coastal

SS316

Molybdenum-alloyed stainless steel engineered for coastal buildings, high-humidity spas, poolside enclosures, and high-salt-spray outdoor environments.

Recommended For: Coastal exteriors, seaside hotels, and exposed outdoor entrances.
Hybrid Tactile Interior Feature

Solid Wood Grip + SS304/316 Posts

Natural solid wood grip bar paired with precision-machined SS304 or SS316 mounting posts, combining warm hand-feel with rigid structural support.

Recommended For: Interior timber doors, boutique retail, and hospitality suites.
Material Grade Environment Corrosion Resistance Typical Applications
SS201 Dry Indoor Basic (Economical) Interior office doors, dry residential partitions
SS304 Indoor / Bathroom / Sheltered Exterior High (Commercial Standard) Shower doors, commercial storefronts, main entrances
SS316 Coastal / High-Humidity / Outdoor Maximum (Salt-Spray Resistant) Coastal properties, pool areas, exposed exterior doors
Solid Wood + SS304/316 Posts Dry / Sheltered Interior Posts: High / Maximum Timber entrance doors, hotel interiors, feature doors
02 / Installation & Door Compatibility

Back-to-Back Mounting & Door Thickness Fit

Every back-to-back pull handle pair ships with protective isolation hardware to prevent metal-to-glass contact and ensure rigid clamping across glass, wood, and metal doors.

Standard Fit · Frameless Tempered Glass

8–12 mm Tempered Glass Doors

  • Glass Drilling Hole: Ø12 mm or Ø14 mm depending on the specific model's post/bolt diameter (always verify CTC and hole diameter on the model spec page before tempering).
  • Anti-Slip Silicone Washers: Installed on both interior and exterior faces of the glass to cushion clamping pressure and prevent handle rotation.
  • Anti-Friction Nylon Protective Sleeves: Inserted directly through the drilled glass bore so the stainless steel through-bolt never touches the glass edge.
Optional Hardware · Thick Door Kit

35–55 mm Wood & Metal-Framed Doors

  • Extended Through-Bolt Screws: Optional long-shank M8/M10 through-bolts supplied on request to accommodate 35–55 mm solid timber, composite, or aluminum/steel-framed doors.
  • Flush Alignment: Washers seat cleanly against finished timber or powder-coated metal stiles without crushing hollow profiles.
  • Order Note: Simply specify your door thickness (e.g., 45 mm timber door) when submitting your RFQ so we pack the matching screw length.

Back-to-Back Installation Overview (4 Steps)

Zero Metal-to-Glass Contact
Step 01
Verify CTC & Bore Holes

Confirm center-to-center (CTC) spacing and Ø12 / Ø14 mm hole diameter prior to glass tempering or timber drilling.

Step 02
Fit Nylon Sleeve & Gaskets

Insert the nylon protective sleeve into the glass bore and place anti-slip silicone washers on both sides of the door.

Step 03
Mount Exterior Pull

Pass the threaded through-bolts from the exterior handle through the nylon sleeves and secure the interior mounting nuts.

Step 04
Lock Interior Handle

Slide the interior handle onto the mounting standoffs and tighten the concealed hex grub screws evenly.

03 / Application Scenarios

Recommended Models by Project Type

Match tube diameter, handle geometry, and stainless steel grade to your project environment.

Bathroom & Wet Zones

Frameless Shower Enclosures

Ideal for H-Type, U-Type, and L-Type pulls (available in compact shower sizes and towel-bar L configurations). Built in SS304 or SS316 with silicone gaskets for daily wet-area durability.

Suggested Styles: H-Type · U-Type · L-Type
High-Traffic Glazing

Commercial Storefronts & Offices

Heavy-duty back-to-back round and square tube pulls (such as Ø32 mm tube models like HZJ-122) engineered for 8–12 mm tempered glass entrance doors in retail, offices, and public buildings.

Suggested Styles: Ø32 mm Heavy-Duty H-Type (e.g. HZJ-122)
Architectural Entryways

Residential & Hotel Entrances

Long-span entrance pulls and Solid Wood Grip + SS304/316 Post handles for timber pivot doors and metal-framed entryways, configurable with extended screws for 35–55 mm door thickness.

Suggested Styles: Long Entrance Pulls · Solid Wood Grip

Ready to specify models or request custom door hardware?

Browse all 22 verified models or send your door thickness, CTC spacing, and target finish directly to our factory team.